Our best Diagnostic tool

RENAULT CLIO III (BR0/1, CR0/1) 1.6 Hi-Flex - Power Steering - 5612

  • asd
  • MIL on
Created: Sep 18, 2015, 11:19:49 AM
Oct 5, 2015, 2:15:42 PM Team autoaid
Dear Mr. *****,
thank you for your request on autoaid.de.

The following information reached us:
  • Renault Clio II 1.6 Hi-Flex (K4M 748)
  • DTC: 5612

A blind diagnosis without concrete symptoms isn't easy.

However, that's the information I can give you:
The mentioned error code 5612 (C1612) means: Steering Angle Sensor Programming. So the ABS/ESP/ASR cannot work properly.

As the DTC says there is a programming fault I would try to recalibrate the sensor. In most cases this should solve your problem.

In some cases this kind of fault is caused by faulty wiring and/or faulty connector(s).
So check wiring and connectors from and to the Steering Angle Sensor. Are there any broken cables, short circuits or losse contacts? It could be a corrored or damaged cable.
Also, it is possible that the Sensor itself is faulty or defective.

I hope this information will help you to solve your problem.

Kind regards,
Team autoaid

Create new answer

Please log in to your autoaid account to post in our community